OneStream Platform Forums

Hi All,I am trying to create a simple view using SQL in BR. it works if do it directly in SQL server so no issue with the syntax. When i am trying to do the same using a BR it gives this error: anyone seens this and know the reason and how to resolve it? Code:  

Hi,We are facing one issue where if we pass periodic entry then the next month it is automatically passing a negative amount of the same value but I need it to be zero only.Example-March =10000 (loaded at view periodic)April= -10000 (should be 0)Can anyone help me how to resolve this?

Hello, I'm in the early stages of building a long-term forecasting cube in our application. The initial requirement is that the business can load volumes, SSP, and product cost by product type to a single 'memo' entity, market, and customer, and then the model will allocate this across base members based on some % drivers.  The Entity piece seems the most complex as I need to translate the amounts to the local currency when allocating so that the business can perform sensitivity analysis on FX rate changes. I've managed to get something allocated across a few entities just using an ADC, however it is writing the amounts to local currency as well as GBP (group currency), which means that when the entities consolidate, they remain at their 'local' currency levels. I tried specifying the destination C#, but it seems to not allow this. Has anyone else done something similar, or knows if OS is capable of this?  

Dear community,  We build an Excel import template (XFDRange) for our client's planning process.  We understand it is possible to load Text Value into Stage; however, we need to retrieve the comments in a cube view for an overview, so the comments need to be stored in the cube. Currently, we set two different columns for the View dimension, one for Periodic view to import the data and the other for Annotation to import text.    We saw there were some similar questions raised in the community, but solutions are not applicable to our case.  Hoping to get some more suggestions regarding this!   Thank you in advance! 

Hi All, Does someone have a best practice regarding scope changes during the year or over the year? I'm already using Custom share so I could add logic which compares Current Period with Prior period relationship properties. Thanks in advance! Kind regards, Jorrit

Hi,Two questions related to XFSet Cell:1. Is there any audit trail to see who entered data via XF Set Cell?2. Is there any functionality where we can restrict specific users from entering data just into XFSetCell but allow them to enter data via other modes like Forms, etc.?

Hi, I have this loop that use multiply unbalance to get the UD3 member segmented in the accounts, this is the current rule but it's not delivering good performance:  I try to recode the rule like this but is not calculating as the loop:  Thanks for your time,

HI All,We are using Control m to trigger DM Sequence in OneStream with API call; we are able to trigger the job without any issues but now the issue is we are unable get response from OneStream to know whether DM sequence completed successfully or failed.Do you know the API, designed to provide success or failure?Thanks in advance.Thanks,Sandeep  

Hello All, We had to make changes to our 2022 (Prior period) data as we identified some issues with it. We cleared the data and tried reloading a bulk file with Full year 2022 data (Split Quarterly). Previously, We used to batch import data in one period (E.g. March), all the other quarter end months would automatically get a green tick and show data for that period in staging table.This time when we loaded numbers to March (data included periods M3,M6,M9,M12 for 2022), we can only see the data in March (M3), we are not able to see data in other periods. Please find the below snap for  reference.   Any help would be appreciated.

Guys , Any idea on how to write a business rule that retrieves a list of all Revenue Accounts .Thanks 

Hi,I have an Excel template file to import via the stage. This Excel is using a matrix-style for the values (time in columns) and also one column with a text commentary.As I have to change the view to “Annotation” in order to import a text value, I was thinking about duplicating the rows by a derivative rule and change the view in that rule. The outcome shows the duplicated rows, but these are missing the text value. So this approch is not working.I also tried to duplicate one time column and use a parser rule to change the view. Doing so, I would need to identify, which time period I am in during pasing, as otherwise all rows are changed.Any ideas about that?Regards,Tobias

Has anyone used BouncyCastle succesfully for PGP decryption? If so, would you mind sharing your BR?Thank you!  

Hi - I am trying to get the confirmation entities from all of my Import Channel under my WF Profile. using extender BR but I am not able to find an instance to call the function. Any help would be appreciated ? I was able to get the Confirmed entitles at the WF Profile Level and the below is the code.  Dim A As String = String.Empty Dim wfClusterPk As WorkflowUnitClusterPk = BRApi.Workflow.General.GetWorkflowUnitClusterPk(si,"Total_Corporate","Actual","2023M1") Dim objList As List(Of BaseNameIntPairInfo) = BRApi.Workflow.Metadata.GetProfileConfirmationEntities(si,wfClusterPk) For Each cent As BaseNameIntPairInfo In objList A = cent.Name brapi.ErrorLog.LogMessage(si,A) Next 

I am trying to utilize a combination of Year() and PeriodNext1() within a GetDataCell, and it's not working. The combination of Year() and Period() within a GetDataCell works if you surround it with brackets, but once you add the Next1, it will not work. Any ideas as to how I can accomplish this?Example of GetDataCell with Year() and Period() working fine: GetDataCell(BWDiff(V#MTD:T#|!Prompt_TimeMonth!|:S#|!Prompt_Scenario!|, V#MTD:T#[Year(|!Prompt_CurrentYear_Comp2!|)Period(|!Prompt_TimeMonth!|)]:S#|!Compare_Scenario2!|))Example of GetDataCell with Year() and PeriodNext1() which gives an error:GetDataCell(BWDiff(V#MTD:T#PeriodNext1(|!Prompt_TimeMonth!|):S#|!Prompt_Scenario_FW!|, V#MTD:T#[Year(|!Prompt_CurrentYear_Comp1!|)PeriodNext1(|!Prompt_TimeMonth!|)]:S#|!Compare_Scenario1_Bgt!|))Error Message Received:Thanks!

Hi All - I recently came across the BRApi.Workflow.Metadata.SaveWorkflowProfileEntity and could not find any documentation. Does it get the name of the entity while saving which is attached to WF ? Any sample code would be appreciated Thanks 

Hi, Is there a programmatic or any other way to log off all users in a certain application before a data management job runs? Because of a bug in Account Recon marketplace solution, the data load fails when the users are active. Ragav.

I am trying to create a business rule which returns a time member driven by the Workflow scenario member. My forecast scenario members are structured as Jan_Fcst, Feb_Fcst...Dec_Fcst. For instance, Dynamic time filter, Year = WFYear and period based on Scenario, eg Jan_Fcst = 20**M1, May_Fcst = 20**M5. Does anyone have a snippet or suggestion on how I can go about doing this? Also, I was going to use it as an XFBR rule and I don't know how to run the BR by itself in order to look at the error log for help testing this rule. Any help is much appreciated.

Entirely tied to the moment we upgraded the clients to version 7.1.3 we started getting the Windows "pick an account" window when they select External Authentication. We are cloud hosted.  I've opened a ticket with Onestream and with our internal resources, and no solution.  Anyone else experience the same or is it just us?

Hi All,  i am presenting to you a situation to understand if what we are trying to do is feasible.We are currently defining the transformation rules for a Client and these rules are quite complex, including composite logics (multi dimensional) and ranges and lists and masks. Based on our tentatives it seems that composite rules only accept masks as type of mapping apart from single code mapping. is there a way to use Ranges and Lists in composite mappings?I.E. A#[40610047;40610099;40620001]:U5#[??1000????;??1001????;??1002????;??1003????;??1004????;??1005????;??1006????;??1007????;??1008????] Thanks a lotMarco

Hello OneStream Community,I am using the SaveDataEventHandler to validate a cell amount being saved. Depending on certain conditions I update the amount in the “args.NewDataCell.cellAmount” and set “args.Cancel = False”.Instead of the modified amount in “args.NewDataCell.cellAmount” the original amount entered gets saved. In the snippet of the code below, a sample error log output when a user inputs 4.3466 in a form would be:Amount Before = 4.3466Amount After = 4.35But the saved amount in the form will be 4.3466.----Snippet Start-----BRapi.ErrorLog.LogMessage(si,"Amount Before = " & args.NewDataCell.CellAmount)args.NewDataCell.CellAmount = Math.Round(args.NewDataCell.CellAmount, 2, MidpointRounding.AwayFromZero)BRapi.ErrorLog.LogMessage(si,"Amount After = " & args.NewDataCell.CellAmount)args.Cancel = False----Snippet End-----Please advise.

Hi everyone, I was trying to add drill down capabilities to a calculated flow dimension member but was having issues with the drill down formula. I entered the formula below but still wasn't able to drill down into the flow member at all. Does anyone have any ideas on why it's not working?   Formula:   Formula for Calculation Drill Down:  

Hello,Can someone please guide me to any useful document or link on Smart Integration Connector ? BR,Avijit

Hello all,I am building a planning application on which the end users interact via drop-downs for Entity and UD1 members, and click a "Save Inputs" button that saves input data and runs a custom calculation on the selected entity and UD1.This is done through a data management step that runs a business rule, and on which the selection of the UD1 and Entity impact the business rule to avoid recalculating all the application each time. There are 6 business rules, that respond to different functional models, activated by different "Save" buttons across the application.I want to create a button or data management sequence that will run all the business rules (the 6 models) for all UD1 members of the 4 entities, as an admin task. I have created a Data Management sequence that runs the 6 steps consecutively, with its corresponding button, but have not been successful to modify the arguments or the Data Management parameters to perform the calculation for all members, as I cannot input "E#All"

All - The below extender rule will be able to delete multiple member from Parent Hierarchy.  1. Provide the Dimension Name & Top Parent Name in the Hierarchy - See highlighted in Red. 2. I want to make a point here the While Count > 3 because the it takes the current parent and other member ENtityDefault1 & None. Since we will not be able to delete it so it should be 3 or loop will be infinite.  3. You can use as an input Variable for Dimension and Top Parent and attach to the dashboard but this is a good starting point.   Dim dimensionPK As DimPk = BRApi.Finance.Dim.GetDimPk(si,"Dimension")Dim nValue As Integer = BRApi.Finance.Members.GetMemberId(si, dimensionPK.DimTypeId,"TopParentName")Dim objList1 As List(Of Member) = BRApi.Finance.Members.GetAllMembers(si,dimensionPK,nValue)Dim objList2 As List(Of Member) = BRApi.Finance.Members.GetBaseMembers(si,dimensionPK,nValue)Dim mbrct As Integer = objList1.CountWhile mbrct > 3For Each mbrbe As Member In obj

HiDoes anyone know if it is possible to create a 'Read only' column in a SQL table editor?I have set the column format 'AllowUpdates = False' which almost gives the correct functionality. However, the field is still editable when you insert a new row.I currently get around this by completely ignoring the value in the field during the SQL Table Editor Save Data Event, but I wondered if it is was possible to ensure that it never appear editable to the user?Regards,Mark