Reporting

I have Delimited list parameter for scale in Cube views, when added the Cube views to Books and given the value to parameter using change parameters option but it's still prompting for it when I ran the book. Any suggestions, without updating the Cube views and get with Books only.  

We are trying to pull WD HR data into OneStream.  At this point, we are just trying to prove we can do it.  I'm trying to setup a data adapter to pull the data using an SIC Direct Connection, but I don't know how to start with the data connector.  What type of data connector?  How do I tell the da to grab the data from the SIC?  Searching the OneStream documentation for these yields nothing and the Foundation Guidebook doesn't speak to the particulars either.0 Kudos Reply  

Hi , wonder if someone can help me, I have a dynamic account % = Dynamic calc Return api.Data.GetDataCell("Divide((A#Account ), (A#Account2 * 1060))") which works great in the CV , but in the graph it does not bring the calculation correctly, BI pulls the "average" of the YTD of the CV (orange cell)value I am looking for is the YTD calc.  should be %75.1 it does work if I bring the Time in the filter for the YTD graphs,   my CV is bringing T#WFTime, so the filter wont work as dynamic dashboard. Same issue with QTD, amounts in the CV in yellow are the correct values, BI Viewer is has the average of the yearif I hard key the WFTime it will only display one QTRI think my problem in the value, what condition rule do I need to have? the closest to actuals is average, but is not correctHopefully is something simple, I just cannot figure it out. thank youLC      

I set the cubeview date to the prior year from the current month input.  I can't get the report title date to show the prior year date, it actually shows the user cubeview date June 2021.  My user input date is 2023M1, and report date is 2022M1 based on the formula T#YearPrior1(|!Param_Time_Select!|)Period(|!Param_Time_Select!|) in the Column formula.  If I put |CVTimeDesc| in the title setting I get June 2021.  How do I get the prior year to show of Jan 2022?

I have 2 rows named row1 and row2.1.  Row1 has two members namely A and B.2. Row2 has three members namely C,D and E.Now, I want to add row1 and row2 so that it sum all A,B,C,D and E.Will this work or will it just take first 2 members(i.e A and C)  of each row? GetDataCell(CVR(Row1) + CVR(Row2)):Name(TotalSum)

Hi,Can we someone disable/hide these button from the dashboards?There are few dashboards which are accessed by multiple users to input data. Accidentally , if any user clicks complete form after updating the numbers then it locks the dashboard and restrict users to input again.Its a hustle to explain the same thing again to the users to avoid clicking "Complete Form" button after every inputs.Is there any way where we can hide it so that they cannot mark the form completed? 

Hello everyone,  we are building an excel based report to get the account hireachy , entity hirerachy. any one having any examples please provide me. =XFGetRelationshipProperty() =XFGetHierarchyProperty()

Wondering if anyone can help with this one.  This happens like 1 out of every 3 times logging into OS where when I click external service provider it just pulls this blank screen and won’t let me log in upon repeated attempts unless I fully shut down and restart excel.

Hello - I have a cube view that I created a connection to in Excel. The cube view has an O#Forms POV with a column configured to enter comments - can modify data is set to True, it has a V#VarianceCommentary member, etc. During testing I am able to submit comments through this Excel sheet, since I also see the comments within the application as well (I have a dashboard that calls a similar one set for commentary). However the users I built the CVs for are only able to submit comments through the application - when they attempt to add them through Excel, either they simply can't add text or when they click Submit Sheet at the top the comment disappears. I made sure the settings, cell formats, etc. for commentary are the same for both the application and Excel connection cube views. Are there any Excel specific settings that I need to check for these users?

Hi all,I am designing a dashboard home page whereby users can navigate directly to the different Workflows for Statutory reporting and Management Reporting, via a button.I am utilising the Change Workflow action in the button settings to set the scenario, however I have an issue as it is not picking up the correct Cube Root Workflow Profile.As you can see in the screenshot below, Act_Stat and Act_Mgmt both sit under MGMT_ACT Cube Root WF Profile (and they both sit under STAT_ACT as well). So when my workflow is set to MGMT_ACT, and I run the button, it doesn’t open the scenario in the correct CRWP. I had a go at adding CubeRoot to the button POV Action, but it didn’t do anything.Does anyone have any idea how I can change the Cube Root Workflow Profile by using this button below, if at all possible?The less pop-up menus and clicks the better for the accountants!ThanksAndrew  

When end users utilize the excel add in functionality, they are only able to calculate 1 year at a time using the calculate button.  Is there a solution to allow users to calculate all (multiple) years shown on the cube view with a click of 1 button in the excel add in?

Hi all, I've col A and col B.I want to show a dynamically calculated col C which should be based on below logic: If col A has no data then display col B Else display col A Please suggest the best options to achieve this. Can it be handled in cube views or requires dynamic calc member formula. Thanks in advance

Kinda of a silly question  I was building a cubeview and was trying to adjust the expansion on the layout.  It was set to default view, which got me to wondering where are these default selections set.  I first looked through the documentation, then remembered this is OneStream and this wouldn't be in any documentation.    I know we can set all this up in templates but are these defaults stored someplace else that we can set them?   Oh and I am not talking about the ones in the Application Properties.

I would truly appreciate any help you can provide in eliminating the blank rows in this pdf version below. These blank rows appear after my header, after all the current asset accounts, and again after total assets. Thank you. 

Hi all, I am building a dashboard that will be used by the Statutory Reporting team with 4 high level Group Balance Sheet checks (including BS = $0.00, IC = $0.00 etc etc). The users want to see a snapshot of the checks on the main dashboard . I have created these (Screenshot 1 with placeholders in there) using Cards in BI viewer and leveraging off the Cube View MD data adapter. They also want to be able to drill into the card to bring up the cube view to further review any balances. I was hoping the Card could be used as a button to open the cube view, but I can't seem to find a way to do that. Is it possible? If not, what are the best options to show checks like below with one specific number so that it shows as button?My second query, is in relation to showing the filtering the data in the BI viewer. The cards above link to a cube view which has rows as E#TotGroup.base and columns as C#Local,AUD,EUR,USD,NZD. The card itself only needs to show E#TotGroup and C#Local. How ca

Why doesn’t the report list the by month activity for entities 44, 87, & 55 from Feb to Sep? It does so for #77. YTD ties because Sept is the catchup month.Parent Entity 56 (Children Entities: 44, 55, 77, & 87) Child Entity #77 Only Child Entity #44

Hi Team.We have a dashboard filled with cube views and also labels inside it where we are retrieving some values fromthe SQL table. Is there any option to get a printout in pdf format of the dashboard using extender rules ?   

Hi Team,I'm wondering if it's possible to create a dashboard with a list of all entities to select specific entities to certify.I would need there a tick marks ("Allow Multiselect" from Grid View settings might work) and make 2 nice buttons for "Certify" and "Revert Certification", would you think this might work?Thanks!  

I have a cube view that I have a spacer columns in. I would like to keep these columns but need their width narrowed when I export it the CV to a report.Here is what it currently looks like when I run the cube view:The spacers here are perfect.But here is what it looks like when I export to a report:The spacers revert back to full width. Is there a way to get them not to do this? Additionally, is there a way to get rid of the dashes in the title rows? It is set to an intersection that will never have data so I could have a clean title row in the CV, but shows the dashes like this when I export it as a report. Really looking for how best I can control/adjust the formatting of any CV I generate into a report. TIA!

Hello All,I have a reporting requirement, where I need to introduce an empty row between two Sub-Business units. These business hierarchies are displayed using .Tree expansion. In between the Tree hierarchies is it possible to introduce “Blank Rows”. Please let me know. Thank you.

Hey All,Looking into a case to get None entity member to appear for IC Matching. Are there any way to get None in IC Dimension to be listed under ICEntities? 

Hello, I would like to use the text 8 attributes that vary by time and scenario to show that an entity can move from a group A to a group B. I am using the UD8 dimension to do this, where all data are set in "None". This is working fine for base member entity. However, in my report nothing happens for parents : As soon as I look for the parent, all data are invariably reported on the "None" member, even though both parent and child entities are set with the same Text8 attribute. Am I missing something ?   Regards,

Hi, I have a CubeView with UD1 on column and account on rows.I have a setting for columns "Use to determine Row suppression". I cant find this option on Rows.I want column to expand if there is data in Row 1-2, but for Row3 I only want to show data IF there is data in Row 1-2. Row 3 will always have data for all UD1 members (column) but I only want to show it if there is data in Row1-2. So column suppression/expansion should only be based on Row 1-2. Is this possible to do in OneStream? 

Hi,Has anyone else encountered an issue where external links are appearing in user files? A few users claim that the original file did not contain any of these links. The users break the links and save the file only to have the links show up again when the file is opened again. These links also only appear for OneStream connect Excel files. Normal excel files do not seem to have this issue.Thanks!OneStream version 7.2.4 

Hello Experts,I am trying to pass cube bound parameters to a BR to do something with it. I can read all parameter except Cube Name. For some reason it is blank. Anyone came across this issue?  Cube Definition:Reading in BR as below:Dim CubeName As String = args.NameValuePairs("DrilledCube")brapi.ErrorLog.LogMessage(si, "DrilledCube:- "+CubeName)